Trimble Juno T41 FAQs

Trimble Juno T41

How can I perform a factory reset on my T41?

To perform a factory reset:

1. Reset the device by holding the power button for about 10 seconds.

2. As soon as you see the Trimble screen, press and hold the START key (Windows Flag) and then press the Right Soft key while still holding the START key.

3. Let go of both keys, then press the ACTION button on the left side of the device to clear the persistent store. Press any other button to cancel.

WARNING: Application software installed by the customer and some licenses, settings and user data will be cleared if this function is performed!

Where can I find the user guide for Android T41?

The T41 Android user guide is available from the following link:

Juno T41 Android User Guide

What media formats are supported on the T41?

The T41 should support all the codecs listed in the Core Media Formats table. It does not meet the video encoding performance recommendations, though these are only recommendations and not requirements.

Where can I find more information about the Juno T41?

Trimble released a Customer FAQ document to answer some of the most common questions:

For any questions not addressed by this guide please contact SDG Systems at or call 724-452-9366.