Downloads
Below you will find information and links for the latest releases of all operating systems for each platform.
To reflash a device from an Android release ISO:
- Burn the ISO to a CD. (Windows) (Mac)
- Boot the computer from that CD.
- Reset the device (e.g. press the Reset button or remove the battery).
- When you first see the SDG logo screen, quickly press the Up button 3 times to enter the reflashing screen.
- Connect the device to the computer (which is now booted from the CD) via USB cable.
- Flashing will start automatically (you'll see a progress indicator and status messages on the device screen).
- The device will reboot when flashing is complete.
Note: SDG Android (AOSP) devices running Android 2.1 release "r2_p0" or later or Android 2.3 r1 or later have a built-in "Check for updates" option in Settings > About phone that allows OTA (over-the-air) updating to the latest release.
Manufacturer |
Product |
Firmware |
Documentation |
SDK & Drivers |
Atid |
AT288 |
|
||
AT288N |
||||
Bluebird |
BI-300 |
|||
BI-500 |
||||
BIP-6000 |
|
|||
BM-170 |
|
|||
BM180 |
||||
BP30 | ||||
BP50 |
||||
BP70 |
||||
BP80 |
||||
EF500/EF400 |
USB Drivers |
|||
Ricoh |
G700SE |
|||
G800SE |
||||
Trimble |
Juno T41 |
|||
Nomad |
Qtopia2 7 (Nomad 900) Qtopia2 6 rc1 (Nomad 800) |
|||
Recon |
Windows Mobile 6.0 |
|||
Yuma 2 |
Ubuntu 12.04 r2.1 |
Qtopia 2
TRIMBLE NOMAD - QTOPIA2-7 RELEASE
The Nomad Qtopia2-7 Release is now available for Download:
http://developer.sdgsystems.com/nomad/updates/nomad-900-qt2mt-ang2007.12-7.tgz
This is based on kernel 2.6.32.24. Please note that this release only supports the Nomad 900 series. Full release notes can be found here.
The latest Qtopia2 release that supports the Nomad 800 series can be found here: http://developer.sdgsystems.com/nomad/updates/nomad-qt2mt-ang2007.12-6rc1.tgz
Qt Extended 4
TRIMBLE NOMAD - QTEX 4.4.3 RELEASE 1.3.3
The Nomad Qtex-4.4.3-release-1.3.3 Release is now available for Download:
http://developer.sdgsystems.com/nomad/updates/nomad-ang2007.12-qtextended4.4.3-release1.3.3.tgz
This is based on kernel 2.6.32.24, and it uses the UBIFS file system rather than JFFS2. You will notice better boot performance with UBIFS. You first need to install the latest bootloader release, which supports UBIFS, as follows:
sudo dfu-util -c 2 -a sdgboot -D sdgboot_nomad_v2045.sdg
When the flash of SDGBoot is successful, reboot the device by pressing the power button. You may then reflash the .sdg files in nomad-ang2007.12-qtextended4.4.3-release1.3.3.tgz in the usual way. Full release notes can be found here.
GPE/X11/QT4
TRIMBLE NOMAD - GPE/X11/QT4-R1 RELEASE
The Nomad GPE/X11/QT4-R1 Release is now available for Download:
This is based on kernel 2.6.32.24, and it uses the UBIFS file system. Please note that this release only supports the Nomad 900 series. Full release notes can be found here.
http://sdgsystems.net/gpe/bip6000/bip6000-ang2007.12-2.6.32-x11-nand-20111213-R1.tgz
PIDION BIP-6000 - GPE/X11/QT4-R1 RELEASE
The BIP-6000 GPE/X11/QT4-R1 Release is now available for Download:
http://sdgsystems.net/gpe/bip6000/bip6000-ang2007.12-2.6.32-x11-nand-20111213-R1.tgz
This is based on kernel 2.6.32.24, and it uses the UBIFS file system. Full release notes can be found here.